High Pressure Water and Electricity Ball Valve
Nominal diameter: DN300~DN1600
Nominal pressure: PN2.5~PN160
Applicable media: water, seawater, sediment water, oil products, etc
Medium temperature: ≤ 80 ℃
Valve opening time: 10~240 seconds (adjustable)
Quick closing time: 3-60 seconds (adjustable)
Slow closing time: 6-90 seconds (adjustable)
Quick closing angle: 70 °± 10 °
Slow closing angle: 20 °± 10 °
Small flow resistance coefficient in fully open state: 0
Optional control power supply: AC220V DC220V、DC110V、DC24V
High pressure hydropower ball valves are mainly used in large and medium-sized hydropower stations. Installed in front of the turbine and used as the inlet valve for the turbine. The upstream is connected to the pressure steel pipe, and the downstream is connected to the inlet pipe of the snail shell. On the one hand, when the water turbine or generator needs maintenance; By using this valve to cut off the water flow in the pipeline, safe maintenance can be carried out. On the other hand, in the event of abnormal conditions in the water turbine or generator, the water flow can be quickly and effectively cut off to prevent accidents from occurring.
High pressure water and electricity ball valves can be used in media containing sediment and water. This valve can only be used as a shut-off valve and cannot be used to regulate flow.
High pressure water and electricity ball valves have the characteristics of low fluid resistance, simple spherical structure, small volume, and light weight. Easy to operate, quick switch, only need to rotate 90 ° from fully open to fully closed, convenient for remote control. Easy maintenance, the sealing ring of the water and electricity ball valve is movable, making disassembly and replacement more convenient. When fully open or fully closed, the sealing surfaces of the ball and valve seat are isolated from the medium, and when the medium passes through, it will not cause erosion of the valve sealing surface. Long service life.